The immediate effects of sensorimotor foot orthoses on foot kinematics in healthy adults.

BACKGROUND: Sensorimotor foot orthoses is an alternative concept, which in addition to mechanical effects, are designed to change muscle activation by altering sensory input to the plantar surface of the foot. However, there is little evidence of how these affect the kinematics of the foot during gait. RESEARCH QUESTION: The aim of the study was to explore the immediate effect of calcaneal medial heel bars and retrocapital bars on foot kinematics during the stance phase of gait. METHODS: Kinematic data were collected from 32 healthy individuals using an eight camera motion capture system and a six-degrees-of-freedom multi-segment foot model in three different orthotic conditions; calcaneal medial heel bar, retrocapital bar, and no orthosis. Vector field statistical analysis was performed to explore the effect of the orthotic conditions over the kinematic time series curves during stance phase. Peak median and interquartile ranges were also reported during the different phases of stance. RESULTS: The calcaneal medial bar significantly decreased rearfoot eversion for the majority of the stance phase and compensatory increased midfoot eversion during the entire stance phase compared to the no orthosis condition. The retrocapital bar rotated the foot externally significantly abducting the rearfoot for the entire stance phase and the midfoot for the majority of stance phase. SIGNIFICANCE: The calcaneal medial heel bar and retrocapital bar significantly altered the foot kinematics in a way that may benefit patients with abnormal pronation and intoeing gait.

Biomechanical effects of three types of foot orthoses in individuals with posterior tibial tendon dysfunction.

BACKGROUND: Posterior tibial tendon dysfunction (PTTD) is characterized by degeneration of this tendon leading to a flattening of the medial longitudinal arch of the foot. Foot orthoses (FOs) can be used as a treatment option, but their biomechanical effects on individuals with PTTD are not yet fully understood. RESEARCH QUESTION: The aim of this study was to investigate the effects of three types of FOs on gait biomechanics in individuals with PTTD. METHODS: Fourteen individuals were recruited with painful stage 1 or 2 PTTD based on Johnson and Strom's classification. Quantitative gait analysis of the affected limb was performed in four conditions: shoes only (Shoe), prefabricated FO (PFO), neutral custom FO (CFO) and custom varus FO (CVFO) with a 5° medial wedge and a 4 mm medial heel skive. A curve analysis, using 1D statistical parametric mapping, was undertaken to assess differences in lower limb joint motion, joint moments and muscle activity over the stance phase of gait across conditions. RESULTS: Decreased hindfoot eversion angles, decreased ankle inversion moments and increased ankle eversion moments were observed with custom FOs compared to the Shoe and PFO conditions (p < 0.001). CFOs and CVFOs induced an increased knee abduction moment compared to Shoe (p < 0.001). No changes in hip kinematics and kinetics or in EMG activity of tested muscles were observed between conditions. SIGNIFICANCE: Custom orthoses may be more suitable than PFOs to decrease the pathological biomechanical outcomes observed in PTTD. Decreased ankle inversion moments during the stance phase could explain why custom orthoses are effective at reducing pain in PTTD patients. However, clinicians should be careful when prescribing custom orthoses for PTTD since unwanted collateral biomechanical effects can be observed at the knee.

Effect of 3D printed foot orthoses stiffness and design on foot kinematics and plantar pressures in healthy people.

BACKGROUND: Foot orthoses (FOs) have been widely prescribed to alter various lower limb disorders. FOs' geometrical design and material properties have been shown to influence their impact on foot biomechanics. New technologies such as 3D printing provide the potential to produce custom shapes and add functionalities to FOs by adding extra-components. RESEARCH QUESTION: The purpose of this study was to determine the effect of 3D printed FOs stiffness and newly design postings on foot kinematics and plantar pressures in healthy people. METHODS: Two pairs of ¾ length prefabricated 3D printed FOs were administered to 15 healthy participants with normal foot posture. FOs were of different stiffness and were designed so that extra-components, innovative flat postings, could be inserted at the rearfoot. In-shoe multi-segment foot kinematics as well as plantar pressures were recorded while participants walked on a treadmill. One-way ANOVAs using statistical non-parametric mapping were performed to estimate the effect of FOs stiffness and then the addition of postings during the stance phase of walking. RESULTS: Increasing FOs stiffness altered frontal and transverse plane foot kinematics, especially by further reducing rearfoot eversion and increasing the rearfoot abduction. Postings had notable effect on rearfoot frontal plane kinematics, by enhancing FOs effect. Looking at plantar pressures, wearing FOs was associated with a shift of the loads from the rearfoot to the midfoot region. Higher peak pressures under the rearfoot and midfoot (up to +31.7 %) were also observed when increasing the stiffness of the FOs. SIGNIFICANCE: 3D printing techniques offer a wide range of possibilities in terms of material properties and design, providing clinicians the opportunity to administer FOs that could be modulated according to pathologies as well as during the treatment by adding extra-components. Further studies including people presenting musculoskeletal disorders are required.

HAPPi Kneecaps! Protocol for a participant- and assessor-blinded, randomised, parallel group feasibility trial of foot orthoses for adolescents with patellofemoral pain.

BACKGROUND: Patellofemoral pain (PFP) is a common cause of knee pain in adolescents, but there are limited evidence-based treatment options for this population. Foot orthoses can improve pain and function in adults with PFP, and may be effective for adolescents. The primary aim of this study is to determine the feasibility of conducting a full-scale randomised controlled trial (RCT) evaluating the effects of contoured foot orthoses on knee pain severity and patient-perceived global change, compared to flat shoe insoles, in adolescents with PFP. The secondary aim is to provide an estimate of treatment effects for foot orthoses, compared to flat insoles, in adolescents with PFP. METHODS: This randomised, controlled, participant- and assessor-blinded, feasibility trial has two parallel groups. Forty adolescents (aged 12-18 years) with clinical symptoms of PFP will be recruited from Queensland, Australia. Participants will be randomised to receive either prefabricated contoured foot orthoses or flat shoe insoles. Both interventions will be fit by a physiotherapist, and worn for 3 months. Feasibility will be evaluated through assessing willingness of volunteers to enrol, number of eligible participants, recruitment rate, adherence with the study protocol, adverse effects, success of blinding, and drop-out rate. Secondary outcomes will evaluate knee-related pain, symptoms, function, quality of life, global rating of change, patient acceptable symptom state, and use of co-interventions, at 6 weeks and 3 months. Primary outcomes will be reported descriptively, while estimates of standard deviation and between-group differences (with 95% confidence intervals) will be reported for secondary outcomes. DISCUSSION: Findings of this study will inform the feasibility of a full-scale RCT investigating the efficacy of contoured foot orthoses in adolescents with PFP. This full-scale study is necessary to improve the evidence base for management of adolescent PFP, and enhance outcomes for this population. TRIAL REGISTRATION: ACTRN12619000957190 .

Effect of prefabricated thermoformable foot orthoses on plantar surface temperature after running: A gender comparison.

There is a lack of evidence about the effect of different type of foot orthoses on plantar surface temperature. Moreover, that effect could be different depending on gender due to anatomical and physiological differences between men and women. The aim of the study was to analyze the effect of a prefabricated thermoformable foot orthosis on plantar surface temperature after running and taking gender differences into account. Thirty recreational runners (15 males, mean (standard deviation): 28 (7) years, 69.7 (6.5) kg, 1.74 (0.05) cm and 22.9 (1.7) kg/m2; and 15 females: 35 (7) years, 55.2 (6.9) kg, 1.63 (0.06) cm and 20.6 (1.9) kg/m2) carried out a maximum incremental test as pre-test, and two running tests on a treadmill at the laboratory wearing previously randomized different foot orthoses (thermoformable and prefabricated generic). The plantar surface temperature of the dominant foot sole in ten regions of interest was assessed before and immediately after 30-min running at 75% of VO2max. The use of thermoformable foot orthoses produced lower temperatures only in men after the run in medial heel (P = 0.033, ES = 0.7), which then disappeared in temperature variation (after - before) (P = 0.910). Regarding gender, women showed lower temperatures before the run in both orthosis conditions (P < 0.039, ES > 0.8), but no differences in temperatures after the run (P = 0.910) in comparison with men. Moreover, absolute temperatures after running were always greater than before the run (P < 0.001, ES > 5.0). In conclusion, the thermoformable foot orthoses do not modify plantar surface temperature after running in healthy runners of either gender, compared to prefabricated generic foot orthoses. Although women present lower baseline plantar temperatures than men, these differences disappear after exercise.

Influence of a Foot Insole for a Down Syndrome Patient with a Flat Foot: A Case Study.

Background and Objectives: Patients with Down syndrome have many orthopedic problems including flat foot. Insertion of an insole for a flat foot provides support to the medial longitudinal arch; thus, insole therapy is often used to treat a flat foot. However, the influence of an insole insertion on the knee joint kinematics for a patient with Down syndrome is unknown. This study aimed to elucidate the influence of an insole for a flat foot on the knee kinematics during gait for a patient with Down syndrome. Materials and Methods: The subject was a 22-year-old male with Down syndrome who had a flat foot. The knee joint angle during the gait was measured using a 3D motion capture system that consisted of eight infrared cameras. Results: The gait analysis demonstrated a reduction in the knee flexion angle during double knee action. The knee valgus and tibial internal rotation angles also decreased during the loading response phase while wearing shoes that contained the insole. Conclusions: As the angle of the knee joint decreased during the gait, it was considered that the stability of the knee joint improved by inserting the insole. In particular, there was a large difference in the tibial internal rotation angle when the insole was inserted. It is thus hypothesized that the insole contributes to the rotational stability of the knee joint. This study suggests that knee stability may improve and that gait becomes more stable when a Down syndrome patient with a flat foot wears an insole.

Optimizing footwear for the diabetic foot: Data-driven custom-made footwear concepts and their effect on pressure relief to prevent diabetic foot ulceration.

AIMS: To assess the effect of data-driven custom-made footwear concepts on plantar pressure relief to prevent diabetic foot ulceration. METHODS: Twenty-four neuropathic diabetic patients at high risk of foot ulceration were measured for in-shoe plantar pressures during walking in four data-driven custom-made footwear conditions, an athletic shoe and an off-the-shelf non-therapeutic shoe. Two evidence-based footwear conditions (Shoe-A; Insole-A) follow a scientific-based design protocol, are handmade, and use in-shoe plantar pressure guided optimization. One evidence-based insole condition (Insole-B) uses a barefoot plantar pressure and 3D foot shape-based computer-assisted design and manufacturing (CADCAM) routine. And one insole condition (Insole-C) uses a barefoot and in-shoe plantar pressure and 3D foot shape-based CADCAM design and optimization routine. Patient satisfaction was scored on walking comfort, shoe fit, weight and appearance. RESULTS: All data-driven footwear conditions significantly reduced metatarsal head peak pressure compared with the non-therapeutic shoe (17-53% relief). Shoe-A and Insole-A showed the lowest metatarsal head peak pressures (mean 112-155 kPa, 90-98% of cases <200 kPa), significantly lower than for Insole-B and Insole-C (mean 119-199 kPa, 52-100% <200 kPa). Patient satisfaction was not significantly different between footwear concepts. CONCLUSIONS: This study proves the offloading efficacy of a scientific-based, handmade, and in-shoe plantar pressure data-driven approach to custom-made footwear design, and advocates its implementation to optimize diabetic footwear for plantar foot ulcer prevention.

Effect of ankle-foot orthosis on functional mobility and dynamic balance of patients after stroke: Study protocol for a randomized controlled clinical trial.

INTRODUCTION: Stroke is the principal cause of impairment in the motor function and gait of adults. One of the resources used in rehabilitation to optimize gait is a prescription of ankle-foot orthosis (AFO), and the most prescribed AFOs are Fixed AFO and Articulated AFO; however, it is not known which of these options is more effective for these individuals. The aim of this study is to evaluate the impact of different types of ankle-foot orthosis functional mobility and dynamic balance in stroke patients. METHODS: Prospective randomized controlled clinical trial with 2 parallel groups will be conducted, and the aim is to recruit 50 patients with stroke diagnosis within 1 year, who indicated that they use both types of orthotics, who had a previous Rankin score less than or equal to 3, and who obtained AFO orthosis through the Hospital Clinics at the Botucatu Medical School (HCBMS) São Paulo, Brazil. After a specific evaluation by a physiotherapist, the patient will receive 1 of the AFO types via randomization. After 30 days, the patient will be reevaluated. The primary outcomes will be balance and mobility, which will be evaluated by the Time Up Go Test (TUG) and Tinetti's Scale of Mobility and Balance (TSMB). The secondary outcomes will be quality of life and the levels of anxiety and depression, which will be evaluated with the European (5D) Quality of Life Scale (Euroqol) and Hospital Anxiety and Depression Scale (HADS). Group allocation will be not concealed because the blinding of participants and of therapists that provide intervention is not possible, and all analyses will be based on an intention-to-treat principle. This study was approved by the Human Research Ethics Committee of the São Paulo State University UNESP, number 2.367.953. The results will be published in relevant journal. DISCUSSION: The results of this study will contribute to clinical practice by identifying the type of AFO orthosis that is more suitable for this condition, helping to standardize prescription of these orthoses by professionals, and guiding future research studies on this subject, which is still incompletely defined in the literature. TRIAL REGISTRATION: RBR-6SF2VV (March 5, 2018).

Effect of bar length on foot abduction and ankle dorsiflexion in Steenbeek foot abduction brace.

We investigated the impact of changes in bar length of Steenbeek foot abduction brace on foot and ankle range of motion in 150 children. The ankle dorsiflexion and foot abduction was measured without brace, with standard brace size (0) as depicted in Steenbeek manual and after variations in bar length (-2˝ to +2˝). The bar length (0) was also compared with shoulder width for Indian population. The Steenbeek foot abduction brace bar length in current use (11.53±1.2˝) was longer than shoulder size (8.14±1.18˝) with no true correlation. Steenbeek foot abduction brace usefulness was evident for foot abduction (46°) but not for dorsiflexion. The varied bar lengths tested did not significantly altered available dorsiflexion or abduction. The currently used Steenbeek foot abduction brace were larger than shoulder widths. The Steenbeek foot abduction brace was dynamic but required prefabrication for its effectiveness. The changes in bar length did not significantly alter foot dynamics occurring with brace.

Integrative studies to design and validate wearable footwear among neuropathic patients.

Uncontrolled high blood sugar levels leads to diabetic neuropathy, which is usually develops slowly. Damaged nerves stop sending messages or may send message slowly at the wrong times. The propsed model is an insole for individuals with peripheral neuropathy conditions, where the peak plantar pressure value is measured at specified locations of the foot by means of a pressure sensor, which can be accessed via  a mobile applications; Simultaneously, a stimulation is given at acupressure points of the foot to relieve pain at definite intervals of time, based on the signals from the controller. A controller is being used to perform these operations which will be transmitted to the mobile application via Bluetooth terminal.

Lower Extremity Surgical Treatment to Improve Function in a Patient with Gollop-Wolfgang Complex: A Case Report.

CASE: Gollop-Wolfgang Complex (GWC) includes congenital absence of the tibia with ipsilateral distal femur bifurcation associated with hand/foot ectrodactyly. A 20-month-old male presented with GWC, including left bifid distal femur with ipsilateral tibial hemimelia and absent extensor mechanism, hypoplastic bilateral thumbs, and right foot tarsal-type preaxial polydactyly. Left through-knee amputation preserving growth and contralateral polydactyly reconstruction were performed. Complications of wound infection and dehiscence were successfully treated. Patient is 44 months old and ambulating with left knee disarticulation prosthesis and right supramalleolar orthosis. CONCLUSIONS: Through-knee amputation and prosthetic fitting provides limb function for GWC patients with tibial hemimelia lacking an extensor mechanism.

Comparative Study of the Effects of Customized 3D printed insole and Prefabricated Insole on Plantar Pressure and Comfort in Patients with Symptomatic Flatfoot.

BACKGROUND There are many shortcomings in traditional prefabricated rehabilitation insoles for symptomatic flatfoot patients. This study investigated the effects of customized 3-dimensional (3D) printed insoles on pressure and comfort of the plantar foot in symptomatic flatfoot patients. MATERIAL AND METHODS Eighty patients with bilateral flatfoot participated in this study. At week 0, patients were randomly assigned into 1 of 2 groups. In the control group, the patients wore standardize shoes with prefabricated insoles; and in the experimental group the patients wore standardize shoes and customized insoles. The Footscan® system recorded peak pressure, peak force, and peak contact area in 10 areas of the sole at weeks 0 and at week 8. Patients used visual analogue scale scores at week 0 and at week 8 to assess overall comfort of insoles. RESULTS At week 0, compared with the control group, the peak pressure in the metatarsal was significantly lower in the experimental group (P<0.05) while the peak pressure in the mid-foot was significantly higher than the control group (P<0.05). At week 8, in the experimental group, the peak pressures in the mid-foot were significantly higher than the control group (P<0.05). The comfort scores (measured by pain scale) reported by the experimental group were significantly lower than those reported by the control group (P<0.05). CONCLUSIONS Customized 3D printed insoles reduced the pressure on the metatarsals by distributed it over the mid-foot area, thus reduced the damage from symptomatic flatfoot. Customized 3D printed insoles were more effective than prefabricated insoles and offered better comfort for patients with symptomatic flatfoot.

Osteogenesis Imperfecta: A Pediatric Orthopedic Perspective.

Osteogenesis imperfecta is a genetically and phenotypically heterogeneous disorder related to a defect or deficiency in the production of type I collagen. It is characterized by brittle bones, fractures, spine and extremity deformity, and a host of extraskeletal manifestations. Type I collagen is present in bone, tendons, ligaments, skin, dentin, and the sclera of the eye and other connective tissues. Osteogenesis imperfecta includes a multitude of disease manifestations that may be present at birth or develop over time and vary depending on the severity of the disease. This article describes the disease presentation and management considerations from a pediatric orthopedic perspective.

Foot centre of pressure and ground reaction force during quadriceps resistance exercises; a comparison between force plates and a pressure insole system.

The study compared the centre of pressure measurements (COP) and vertical ground reaction forces (vGRF) from a pressure insole system to that from force plates (FP) during two flywheel quadriceps resistance exercises: leg press and squat. The comparison was performed using a motion capture system and simultaneous measurements of COP and vGRF from FP and insoles. At lower insole-vGRF (<250 N/insole) COP accuracy deteriorated and those data were excluded from further analysis. The insoles systematically displaced the COP slightly posteriorly and medially compared to the FP measurements. Pearson's coefficient of correlation (r) between insole- and FP-COP showed good agreement in both the anteroposterior (squat: r = 0.96, leg press: r = 0.97) and mediolateral direction (squat: r = 0.84, leg press: r = 0.90), whereas the root-mean-square errors (RMSE) were lower in the mediolateral (squat: 3.9 mm, leg press: 4.5 mm) than the anteroposterior (squat and leg press: 11.8 mm) direction. Vertical GRF was slightly overestimated by the insoles in leg press and RMSE were greater in leg press (8% of peak force) than in squat (6%). Overall, results were within the range of previous studies performed on gait. The strong agreement between insole and FP measurements indicates that insoles may replace FPs in field applications and biomechanical computations during resistance exercise, provided that the applied force is sufficient.

Effect of long-term use of ankle-foot orthoses on tibialis anterior muscle electromyography in patients with sub-acute stroke: A randomized controlled trial.

OBJECTIVE: To determine: (i) whether the use of ankle-foot orthoses over a period of 26 weeks affects tibialis anterior muscle activity; (ii) whether the timing of provision of ankle-foot orthoses (early or delayed) affects the results; (iii) whether the provision of ankle-foot orthoses affects tibialis anterior muscle activity within a single measurement. DESIGN: Randomized controlled trial. SUBJECTS: Unilateral hemiparetic subjects, a maximum of 6 weeks post-stroke. METHODS: Subjects were assigned randomly to early (at inclusion; week 1) or delayed provision of ankle-foot orthoses (8 weeks later; week 9). Tibialis anterior electromyography was measured with and without ankle-foot orthoses, in study weeks 1, 9, 17 and 26. RESULTS: A total of 26 subjects were analysed. In a single measurement, use of an ankle-foot orthosis significantly reduced the activity levels of the tibialis anterior muscle during the swing phase (p = 0.041) compared with walking without an ankle-foot or-thosis. During the 26-week follow-up, no changes were found in tibialis anterior muscle activity in the swing phase without an ankle-foot orthosis, both within-groups (p = 0.420 early; p = 0.282 delayed), and between-groups (p = 0.987). After 26 weeks, no differences were found in tibialis anterior muscle activity between both groups in the swing phase, with (p = 0.207) or without ankle-foot orthoses (p = 0.310). CONCLUSION: Use of ankle-foot orthoses post-stroke reduced tibialis anterior muscle activity in the swing phase within 1 measurement; however, long-term use of ankle-foot orthoses for 26 weeks did not affect such activity. Early or delayed provision of ankle-foot orthoses did not affect the findings. The results indicate that there is no need to fear negative consequences on tibialis anterior-activity because of long-term AFO-use (early) after stroke.

Usability of the Thera-Band® to improve foot drop in stroke survivors.

BACKGROUND: Stroke survivors show "foot drop", dragging their toes on the ground in the swing phase of gait. Ineffective ankle dorsiflexion may result in an abnormal gait pattern. OBJECTIVE: The purpose of this study was to investigate the effect of ankle Thera-Band® use on gait patterns in stroke survivors. METHODS: Gait data were collected in eight subjects who had had strokes using gait analysis system, both with and without the Thera-Band®. The following dependent variables of gait parameters were analyzed: velocity, cadence, step length, stride length, single support time, and double support time. RESULTS: There were significant improvements in gait velocity, cadence, stride length, and double support time in those who used the Thera-Band® compared to those who did not (p <  0.05). However, there were no significant differences in step length or single support time (p >  0.05). CONCLUSIONS: The results show that ankle Thera-Band® use may have a positive effect in improving gait parameters by increasing the ankle stability in stroke survivors with foot drop. Its usefulness in the rehabilitation of foot drop in stroke survivors needs to be further investigated.

Fibular insufficiency fracture: an under-reported complication of advanced tibialis posterior dysfunction.

We present a case of fibular insufficiency (stress) fracture in a patient with pre-existing asymptomatic advanced tibialis posterior dysfunction. The patient had severe planovalgus (flat foot) deformity but no pain before the injury; hence had never sought any treatment. She was first treated conservatively for the fracture which failed to control the deformity and had ongoing symptoms. She eventually required tibio-talo-calcaneal fusion. To the best of our knowledge, this is the first case report of this condition in the English literature. In patients with severe tibialis posterior dysfunction, weight-bearing axis passes directly from calcaneum to fibula making it vulnerable to fracture. Patients should be made aware of this risk even if they are asymptomatic and encouraged to use orthotic support for protection against insufficiency fractures.

Preliminary evaluation of prototype footwear and insoles to optimise balance and gait in older people.

BACKGROUND: Footwear has the potential to influence balance in either a detrimental or beneficial manner, and is therefore an important consideration in relation to falls prevention. The objective of this study was to evaluate balance ability and gait patterns in older women while wearing prototype footwear and insoles designed to improve balance. METHODS: Older women (n = 30) aged 65 - 83 years (mean 74.4, SD 5.6) performed a series of laboratory tests of balance ability (postural sway on a foam rubber mat, limits of stability and tandem walking, measured with the Neurocom® Balance Master) and gait patterns (walking speed, cadence, step length and step width at preferred speed, measured with the GAITRite® walkway) while wearing (i) flexible footwear (Dunlop Volley™), (ii) their own footwear, and (iii) prototype footwear and insoles designed to improve dynamic balance. Perceptions of the footwear were also documented using a structured questionnaire. RESULTS: There was no difference in postural sway, limits of stability or gait patterns between the footwear conditions. However, when performing the tandem walking test, there was a significant reduction in step width and end sway when wearing the prototype footwear compared to both the flexible footwear and participants' own footwear. Participants perceived their own footwear to be more attractive, comfortable, well-fitted and easier to put on and off compared to the prototype footwear. Despite this, most participants (n = 18, 60%) reported that they would consider wearing the prototype footwear to reduce their risk of falling. CONCLUSION: The prototype footwear and insoles used in this study improve balance when performing a tandem walk test, as evidenced by a narrower step width and decreased sway at completion of the task. However, further development of the design is required to make the footwear acceptable to older women from the perspective of aesthetics and comfort. TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry. ACTRN12617001128381 , 01/08/2017 (retrospectively registered).

User Survey of 3 Ankle Braces in Soccer, Volleyball, and Running: Which Brace Fits Best?

CONTEXT: Recurrence rates for ankle sprains are high. Therefore, preventive measures such as ankle bracing during sports are recommended. OBJECTIVE: To systematically evaluate the perceived ease of use, quality, comfort, stability, and hindrance of and the overall satisfaction with 3 contemporary brace types in 3 types of sports. DESIGN: Randomized comparative user survey. SETTING: Recreational sports: soccer, volleyball, and running. PATIENTS OR OTHER PARTICIPANTS: Young adult recreational athletes (29 soccer players, 26 volleyball players, and 31 runners). INTERVENTION(S): Compression brace (CB), lace-up brace (LB), and semirigid brace (SB). MAIN OUTCOME MEASURE(S): Rating of perceived ease of use, quality, comfort, stability, and hindrance of and overall satisfaction with the brace types during sports on a 5-point Likert scale. The secondary outcome measure was participants' willingness to buy the tested brace. RESULTS: Overall, the 3 brace types received high mean scores for ease of use and quality. Soccer players preferred the CB over both alternatives, considering the higher scores for comfort (CB = 4.0, LB = 3.5, SB = 2.8), hindrance (CB = 3.7, LB = 2.9, SB = 2.8), overall satisfaction (CB = 3.6, LB = 3.0, SB = 2.5), and greatest willingness to buy this brace. Volleyball players preferred the LB over both alternatives, considering the higher scores for stability (LB = 4.2, CB = 3.2, SB = 3.3), overall satisfaction (LB = 3.8, CB = 3.0, SB = 3.0), and greatest willingness to buy this brace. Runners preferred the CB over both alternatives considering the better score for hindrance (CB = 3.6, LB = 2.8, SB = 2.9) and greatest willingness to buy this brace. CONCLUSIONS: All 3 ankle-brace types scored high on perceived ease of use and quality. Regarding the brace types, soccer players, volleyball players, and runners differed in their assessments of subjective evaluation of comfort, stability, hindrance, overall satisfaction, and willingness to buy the brace. Soccer players and runners preferred the CB, whereas volleyball players preferred the LB.

Custom-made foot orthoses: an analysis of prescription characteristics from an Australian commercial orthotic laboratory.

BACKGROUND: Foot orthoses are widely used in the prevention and treatment of foot disorders. The aim of this study was to describe characteristics of custom-made foot orthosis prescriptions from a Australian podiatric orthotic laboratory. METHODS: One thousand consecutive foot orthosis prescription forms were obtained from a commercial prescription foot orthosis laboratory located in Melbourne, Victoria, Australia (Footwork Podiatric Laboratory). Each item from the prescription form was documented in relation to orthosis type, cast correction, arch fill technique, cast modifications, shell material, shell modifications and cover material. Cluster analysis and discriminant function analysis were applied to identify patterns in the prescription data. RESULTS: Prescriptions were obtained from 178 clinical practices across Australia and Hong Kong, with patients ranging in age from 5 to 92 years. Three broad categories ('clusters') were observed that were indicative of increasing 'control' of rearfoot pronation. A combination of five variables (rearfoot cast correction, cover shape, orthosis type, forefoot cast correction and plantar fascial accommodation) was able to identify these clusters with an accuracy of 70%. Significant differences between clusters were observed in relation to age and sex of the patient and the geographic location of the prescribing clinician. CONCLUSION: Foot orthosis prescriptions are complex, but can be broadly classified into three categories. Selection of these prescription subtypes appears to be influenced by both patient factors (age and sex) and clinician factors (clinic location).